How to Fix a Leaking Pipe Joint in Moore, OK

A leaking pipe joint is one of the most frustrating plumbing issues you will encounter. Unfortunately, most people will experience it once in a while. It’s one of the top reasons many residents call plumbers in Moore, OK.

Joint leaks are common because at least two parts are joined together. In PVC pipes, the glue between them can weaken over time, and in copper pipes, corrosion can also cause the joints to weaken.

When those leaks appear, you have to move quickly. The leading plumbers in Moore, OK, explore how to fix a leaking pipe joint in this post. 

Why It’s Important to Fix a Leaking Pipe Joint in Your Moore, OK, Home Quickly

Fix Leaking Pipe

Leaking pipe joints don’t always mean water gushing out of the pipework. In most cases, a leak starts with a minor drip, so it can be tempting to ignore it or put a bucket underneath it and go about your day. However, it’s rarely a good idea.

Looking at the causes of joint leaks (as we touched upon briefly above), it’s clear that the joint leak will only worsen as water flows through the joint. So, that minor leak will almost certainly worsen until water is pouring out of the joint, and the damage may not always be progressive.

That bucket you’ve got underneath the joint that rarely fills up in days can suddenly fill up and overflow when the joint deteriorates further.

Depending on the source of the water flowing through the joint, this could mean returning to a flooded home with soaked carpets, damaged floorboards, etc. Ignoring the leak can also affect water quality. 

The Different Approaches to Fixing a Leaking Pipe Joint in Your Moore, OK, Home

Fixing a Leaking Pipe in Moore, OK

We’ll cover how to fix a leaking pipe joint below. Turn off the water supply to the pipe before you try any of these approaches. 

Tighten the Joint

If your pipe joint is leaking because it has come loose, then the fix is as simple as tightening the joint. You can do this by using an adjustable wrench or pliers to tighten the coupling or nut at the joint. However, you should be careful to avoid over-tightening the joint as it can damage the threads.

After you’ve tightened the joint, turn on the water supply and check to see if the leaks continue. 

Replace Worn Washers

If you’ve used the approach above and the leaks persist, you may already have worn washers within the joint. You’ll have to replace them with new ones that are compatible with the pipe. Measure the pipe (or take pictures), then head to your local hardware store for replacement washers. 

Use a Silicone Repair Tape

Wrapping a waterproof silicone repair tape over the leaking joint can stop the leak for a long time. For the best seal, we recommend applying multiple layers of silicone tape over the area. This will give you a solid rubber seal over the joint.

One major issue with this approach is that you may not have adequate space to stretch out the repair tape in tight areas. So, if the leaking joint is underneath a cabinet or too close to the wall or floor, you may have to use other approaches. 

Use Epoxy Putty

Epoxy features two components: the hardener and resin. Mixing these two parts will give you a strong sealant to stop the leak around the pipe joint. This solution works best for pipes leaking due to worn-out glue or corrosion.

To apply the epoxy putty to the area, wipe the pipe surface to ensure it’s dry. Next, mold some of the putty into a sausage-like shape while it’s soft. Then, apply it around the leaking joint. Push the putty down onto the pipe to ensure you get a tight seal to stop the leak. 

Use Fiberglass Resin Tape and Cloth

Fiberglass resin tape is another effective option for fixing a leaking pipe joint in your Moore, OK, home. It will work especially well for a small leak and can last months or years if done correctly.

To apply fiberglass resin tape, clean the affected area first and lightly sand the surface of the leaky pipe with high-grit sandpaper. This will make the pipe surface more adhesive. Next, dampen the resin cloth and dry it before wrapping it around the leaking joint.

Cut out as much of the fiberglass resin tape as you need to cover the length of the pipe and hold the resin cloth in position with the tape. Be sure to wrap the tape around the cloth properly. After fixing the pipe, wait around 30 minutes before opening the water supply through the pipe again. 

Use Clamp and Patch

The clamp and patch approach works best for significant leaks. However, like other repair options, it’s a temporary fix that will probably last only a few weeks. The process involves using a waterproof clamp and patch material to cover the leak outside the pipe joint. 

Replace the Joint and Fittings

If the joint has a deep crack somewhere around it, the suggestions above may not help you stop the leak. In this case, you may need to replace the joint and the fittings around it.

This is more practical for PVC joints, as the parts are readily available in stores. However, you’ll likely need professional help installing copper pipes. 

Get Fast and Effective Repairs for Your Leaking Pipe Joint in Moore, OK

Knowing how to fix a leaking pipe joint is one thing; completing the repair work efficiently is another. Are you overwhelmed by the process of fixing your leaking pipe joint? Do you need professional help with fixing the pipe leak? Champion Plumbing can help.

We can provide a permanent solution to the leak and take steps to prevent recurrence, such as adjusting the water pressure in the pipe system.

Call Champion Plumbing in Moore, OK, at 405-889-1318 to book an appointment. 

Similar Posts

The next time you need a plumbing contractor, call Champion Plumbing if you’re in the Edmond, OK area at 405-889-1318 and give us the chance to earn your business.